Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Feature

• Extra-long-reach tools provide reach beyond those of standard-length end mills
• Four flutes produce a better finish than fewer flutes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter SLRC602 uncoated high-speed steel extra-long-reach square nose end mill has four flutes and a 30-degree helix for creating sharp, unrounded cuts in a wide range of materials. Extra-long-reach end mills provide greater access to recessed areas of the workpiece than standard-length tools. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter Feature

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Four flutes produce a better finish than fewer flutes
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter CNC430 NC-style uncoated carbide square nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SR545 Carbide End Mill, for Titanium Roughing, Uncoated (Bright), 5 Flutes, 0.025" Chamfer End, 1-1/4" Cutting Length, 1" Cutting Diameter

Niagara Cutter SR545 Carbide End Mill, for Titanium Roughing, Uncoated (Bright), 5 Flutes, 0.025" Chamfer End, 1-1/4" Cutting Length, 1" Cutting Diameter Reviews

Other Picture

Niagara Cutter SR545 Carbide End Mill, for Titanium Roughing, Uncoated (Bright), 5 Flutes, 0.025" Chamfer End, 1-1/4" Cutting Length, 1" Cutting Diameter Feature

• 5 flute design provides exceptional cutting ability in many hard to machine alloys & leaves the material with a fine polished finish
• High Performance and designed for peripheral milling titanium
• Features a fine-pitch rougher with chamfer
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications
• Center Cutting End Mills are designed with "End Teeth" making these ideal for Slotting and Cavity applications

Niagara Cutter uses an "extra fine" grain cemented carbide raw material that is a true sub-micron grain tungsten carbide alloy. Niagara Cutter's carbide material is classified within the C1 to C4 range, and has an excellent combination of strength and toughness. Using raw materials with unique properties and high purity ensure Niagara Cutter's consistent high quality. Specifically designed for machining Aluminum, Stainless Steel, Titanium and Exotic Alloy Materials. Niagara Cutter is a leader in cutting tool technology and is proud to have their products made in the USA.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter REM445 Cobalt Steel End Mill, Non-Center Cut Fine Pitch Rougher, Uncoated (Bright), 6 Flutes, Chamfer End, 5" Cutting Length, 1-1/2" Cutting Diameter

Niagara Cutter REM445 Cobalt Steel End Mill, Non-Center Cut Fine Pitch Rougher, Uncoated (Bright), 6 Flutes, Chamfer End, 5" Cutting Length, 1-1/2" Cutting Diameter Reviews

Other Picture

Niagara Cutter REM445 Cobalt Steel End Mill, Non-Center Cut Fine Pitch Rougher, Uncoated (Bright), 6 Flutes, Chamfer End, 5" Cutting Length, 1-1/2" Cutting Diameter Feature

• 6 Flute design allows for this end mill to be fed 3 times faster that similar 2 flute end mills
• Cobalt roughing end mill for working on all types of materials and high temperature alloys especially slotting and profiling
• Cobalt steel tools are similar to high-speed steel, but with more cobalt for improved performance when cutting harder metals such as stainless steel or nickel alloys
• Uncoated end mills feature just the base substrate without any additional treatment or coatings and are suitable for a wide range of applications

Multi Flute / M42 8 percentage Cobalt Steel.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Reviews

Other Picture

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter C430 uncoated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

• Niagara Cutter C430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter
• Niagara Cutter C430 Carbide End Mill, General Purpose, TiAlN, 4 Flutes, Square End, 1" Cutting Length, 3/16" Cutting Diameter
• Niagara Cutter ME230 Miniature Carbide End Mill, Uncoated (Bright), 2 Flutes, Square End, 0.255" Cutting Length, 0.085" Cutting Diameter
• Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 1/4" Cutting Length, 1/8" Cutting Diameter
• Niagara Cutter C230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Square End, 1/4" Cutting Length, 1/16" Cutting Diameter

Detail Reviews

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter Reviews

Other Picture

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter Feature

• Heavy-duty end mills have a larger diameter than conventional end mills for increased strength and rigidity when large amounts of material need to be removed
• Six flutes produce a better finish than fewer flutes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Ball nose end mills (also called ball end) create contoured surfaces

The Niagara Cutter HDB780 uncoated high-speed steel heavy-duty ball nose end mill has six flutes and a larger diameter than conventional end mills. The large-diameter shank provides strength and rigidity for machining a wide range of materials The six large flutes produce a better finish than fewer flutes. High-speed steel (HSS) is a common, general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provide an economical alternative to coated tools.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool. It can be fed straight into the workpiece like a drill bit and used for applications such as slotting and profiling. The tool’s ball nose creates contoured surfaces where sharp corners are not required. Cutting diameter tolerance is +0.005” to -0.000". This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at two facilities in Pennsylvania and Massachusetts. This allows the company control over production, an essential benefit for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter Reviews

Other Picture

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter Feature

• Square end, center-cutting end mills, for machining side, face, and slots, and boring into material like a drill
• Uncoated (bright) finish tools have no additional surface treatment or coating, offering just the base (substrate) material for an economical alternative
• High-speed steel (HSS) with carbide, for wear resistance and long tool life
• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to go deep into the workpiece and remove material
• Regular length, for usage with a wide variety of applications, reducing tool changing

The Precision Twist E3302M series of end mills are a regular length, square end, two-flute design are made of carbide with an uncoated finish and is used for high-speed machining with best performance in steel, cast iron, and copper.

Uncoated (bright) tools have no finish or coating. They are a common choice for general use applications. The regular length trades off rigidity for length, so you can work with thicker pieces of material or be able to reach out-of-the-way locations.

Square end mills are very versatile with the ability to machine in three dimensions and the two-flute design allows for a large chip space and easy chip removal. While the surface finish is not as smooth as a three- or four-flute design, they are very good for heavy-duty, large material removal operations. Made of carbide alloys, they have many advantages over HSS such as faster feed rates due to its hardness. They can be run several times faster than HSS. Carbide’s high heat and wear resistance helps extend the life of the tool and increase productivity.

End mills are designed to remove material and create three-dimensional shapes or profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can make plunge cuts similar to a drill bit.

Precision manufactures machine tools under the following brands: Precision Twist, Precision Dormer, and Union Butterfield. They have locations around the world, and provide tools adhering to ANSI, NAS, and DIN standards.

Visit Store Now !!

Detail Products

Detail Reviews