Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter

Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Reviews

Other Picture

Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• High-performance powdered-metal cobalt for toughness and resistance to heat and wear
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter ST570 TiCN-coated T15 cobalt square nose end mill has two flutes and a 30-degree helix for general-purpose milling applications in high-temperature alloys and a wide range of materials. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

High-performance powdered-metal cobalt (T15) is high-speed steel (HSS) alloyed with cobalt, tungsten, and vanadium, which provides better heat and wear resistance than high-speed steel, and increased toughness when compared to general-purpose cobalt. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Feature

• Extra-long-reach tools provide reach beyond those of standard-length end mills
• Four flutes produce a better finish than fewer flutes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter SLRC602 uncoated high-speed steel extra-long-reach square nose end mill has four flutes and a 30-degree helix for creating sharp, unrounded cuts in a wide range of materials. Extra-long-reach end mills provide greater access to recessed areas of the workpiece than standard-length tools. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter Reviews

Other Picture

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter Feature

• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SPC408 TiCN-coated cobalt steel square nose end mill has a 30-degree helix angle for milling a wide range of materials, including high-temperature alloys. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling, and slotting. Cutting diameter tolerance is +0.001” to -0.000”. The end mill has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter DS420 High-Speed Steel End Mill, Stub Length, TiCN Coated, 4 Flutes, Double Square End, 3/32" Cutting Length, 1/16" Cutting Diameter

Niagara Cutter DS420 High-Speed Steel End Mill, Stub Length, TiCN Coated, 4 Flutes, Double Square End, 3/32" Cutting Length, 1/16" Cutting Diameter Reviews

Other Picture

Niagara Cutter DS420 High-Speed Steel End Mill, Stub Length, TiCN Coated, 4 Flutes, Double Square End, 3/32" Cutting Length, 1/16" Cutting Diameter Feature

• The tool has a 3/16" shank diameter and a smaller cutting diameter, allowing better control over the size of the cut than larger tools when creating precise details and contours
• Stub length increases the strength of the tool, making it less likely to break in the workpiece
• Double-end square nose end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Four flutes produce a better finish than fewer flutes

The Niagara Cutter DS420 TiCN-coated high-speed steel stub-length double-end square nose end mill has a non-center-cutting design, a 3/16” shank diameter, four flutes, and a 35-degree helix for creating shallow cuts in a wide range of materials. The tool has a 3/16” shank diameter and a smaller cutting diameter, allowing better control over the size of the cut than larger tools when creating precise details and contours. The stub length increases tool strength and makes it less likely to break in the material being machined. It is best used when depth of cut is shallow. The double-end design has cutting edges at both ends of the shank that can be swapped out when one side begins to show signs of wear, doubling the tool life compared to single-end tools. Four flutes produce a better finish than fewer flutes. The 35-degree helix angle provides more support behind the cutting edge than higher angles, and increases cutting action and chip evacuation compared to the standard 30-degree helix. It efficiently cuts difficult-to-machine material, moving it up the spiral and away from the workpiece.

The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The non-center-cutting design is for applications such as peripheral milling and finishing. Cutting diameter tolerance is +0.000" to -0.001". The round shank accommodates a range of tool holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SLR600 High-Speed Steel End Mill, Heavy-Duty, Extra Long Reach, TiN Coated, 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter

Niagara Cutter SLR600 High-Speed Steel End Mill, Heavy-Duty, Extra Long Reach, TiN Coated, 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter SLR600 High-Speed Steel End Mill, Heavy-Duty, Extra Long Reach, TiN Coated, 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Feature

• Extra-long-reach tools provide reach beyond that of standard-length end mills
• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• High-speed steel is compatible with a variety of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter SLR600 TiN-coated high-speed steel extra-long-reach square nose end mill has a 30-degree helix and a non-center-cutting design for peripheral milling and finishing applications in a wide range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. Extra-long-reach end mills provide greater access to recessed areas of the workpiece than standard-length tools. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end creates sharp, unrounded cuts. The non-center-cutting design is for applications such as peripheral milling and finishing. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter Reviews

Other Picture

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• High-speed steel is compatible with a variety of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SMM830 TiAlN-coated high-speed steel square nose end mill has two flutes and a metric cutting diameter for general-purpose machining. The two flutes have better chip-carrying capacity than end mills with more flutes, while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed straight into the workpiece like a drill bit. The tool’s square end creates sharp, unrounded cuts. While the cutting diameter is metric, the shank is sized in inches. Cutting diameter tolerance is +0.025 mm to -0.000 mm. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at two facilities in Pennsylvania and Massachusetts. This allows the company control over production, an essential benefit for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Double-end square nose end mills (also called square end) create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter DPC560 TiN-coated cobalt steel double-end square end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The double-end design has cutting edges on both ends, allowing a new cutting surface to be substituted when the first shows wear, which doubles the tool’s life compared to single-end square nose end mills. Four flutes produce a better finish than two flutes. The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end has straight cutting edges to create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool. It can be fed straight into the workpiece like a drill bit for plunge cutting, and used for applications such as slotting and profiling. Cutting diameter tolerance is +0.000” to -0.0015”. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter Reviews

Other Picture

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter Feature

• 60-degree helix angle produces a fine finish by providing efficient cutting action in light profiling and finishing applications
• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter C360 TiCN-coated carbide square nose end mill has a 60-degree helix angle for light profiling and finishing applications on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The 60-degree helix offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. .

The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The cutting diameter is +0.000” to -0.002”. The round shank accommodates a range of tool holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter CNC430 Carbide End Mill, NC Tolerance, Uncoated (Bright), 4 Flutes, Square End, 1/2" Cutting Length, 1/8" Cutting Diameter Feature

• NC tolerance end mills have a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide without changing diameter
• Four flutes produce a better finish than fewer flutes
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter CNC430 NC-style uncoated carbide square nose end mill has four flutes and a plus-tolerance cutting diameter to match those of high-speed steel end mills, allowing an upgrade from high-speed steel to carbide and making the tool useful for milling keyways. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. NC-style tools can be used on both the older Numerical Control (NC) machines, which are programmed using physical media such as magnetic tape, and the newer CNC (Computer Numerical Control) machines, which are programmed using computers. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank on shank diameters larger than 3/8”.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Reviews

Other Picture

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Feature

• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• High-speed steel is compatible with a variety of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SC406 TiCN-coated high-speed steel square end mill has a 30-degree helix angle for general-purpose machining on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end creates sharp, unrounded cuts.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit, and used for applications such as profiling and slotting. The cutting diameter tolerance is +0.001” to -0.000”. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Precision Twist E3304MG Solid Carbide End Mills, TiN Coated, 4 Flute, Square End, 25.0 mm Cutting Length, 11.00 mm Cutting Diameter

Precision Twist E3304MG Solid Carbide End Mills, TiN Coated, 4 Flute, Square End, 25.0 mm Cutting Length, 11.00 mm Cutting Diameter Reviews

Other Picture

Precision Twist E3304MG Solid Carbide End Mills, TiN Coated, 4 Flute, Square End, 25.0 mm Cutting Length, 11.00 mm Cutting Diameter Feature

• Square end, center cutting end mills, for machining side, face, and slots, and boring into material like a drill
• Titanium nitride (TiN) is a coating to extend cutting tool life and permit faster cutting speeds than with uncoated tools
• Carbide can run at higher speeds than high-speed steel (HSS), resisting abrasion and high cutting temperatures
• Four flutes offer a better surface finish and more rigidity than two- and three-flute types and higher feed rates
• Regular length, for usage with a wide variety of applications, reducing tool changing

The Precision Twist E3302MG series of end mills are a regular length, square end, four-flute design made of carbide with a TiN finish and are used for high-speed machining with best performance in steel and stainless steel.

The TiN finish is a gold-colored ceramic coating that combines hardness and low friction to extend cutting tool life and permit faster cutting speeds than with uncoated tools. You can be more productive and spend less time working. The regular length trades off rigidity for length, so you can work with thicker pieces of material or be able to reach out-of-the-way locations. The carbide material offers many advantages over HSS such as faster feed rates due to its hardness. They can be run several times faster than HSS. Carbide’s high heat and wear resistance help extend the life of the tool and increase productivity.

Square end mills are very versatile with the ability to machine in three dimensions, and the four-flute design has high rigidity, the largest section area, and a better surface finish than two-flute designs, and is suitable for profiling, side milling, and shallow slotting. Most end mills have a 30-degree spiral helix angle, suitable for working with a wide range of materials.

End mills are designed to remove material and create three-dimensional shapes or profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can make plunge cuts similar to a drill bit.

Precision manufactures machine tools under the following brands: Precision Twist, Precision Dormer, and Union Butterfield. They have locations around the world, and provide tools adhering to ANSI, NAS, and DIN standards.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Reviews

Other Picture

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter C430 uncoated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

• Niagara Cutter C430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter
• Niagara Cutter C430 Carbide End Mill, General Purpose, TiAlN, 4 Flutes, Square End, 1" Cutting Length, 3/16" Cutting Diameter
• Niagara Cutter ME230 Miniature Carbide End Mill, Uncoated (Bright), 2 Flutes, Square End, 0.255" Cutting Length, 0.085" Cutting Diameter
• Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 1/4" Cutting Length, 1/8" Cutting Diameter
• Niagara Cutter C230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Square End, 1/4" Cutting Length, 1/16" Cutting Diameter

Detail Reviews

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter Reviews

Other Picture

Precision Twist E3302M Solid Carbide End Mill, Uncoated (Bright) Finish, 2 Flute, Square End, 22.0 mm Cutting Length, 10.00 mm Cutting Diameter Feature

• Square end, center-cutting end mills, for machining side, face, and slots, and boring into material like a drill
• Uncoated (bright) finish tools have no additional surface treatment or coating, offering just the base (substrate) material for an economical alternative
• High-speed steel (HSS) with carbide, for wear resistance and long tool life
• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to go deep into the workpiece and remove material
• Regular length, for usage with a wide variety of applications, reducing tool changing

The Precision Twist E3302M series of end mills are a regular length, square end, two-flute design are made of carbide with an uncoated finish and is used for high-speed machining with best performance in steel, cast iron, and copper.

Uncoated (bright) tools have no finish or coating. They are a common choice for general use applications. The regular length trades off rigidity for length, so you can work with thicker pieces of material or be able to reach out-of-the-way locations.

Square end mills are very versatile with the ability to machine in three dimensions and the two-flute design allows for a large chip space and easy chip removal. While the surface finish is not as smooth as a three- or four-flute design, they are very good for heavy-duty, large material removal operations. Made of carbide alloys, they have many advantages over HSS such as faster feed rates due to its hardness. They can be run several times faster than HSS. Carbide’s high heat and wear resistance helps extend the life of the tool and increase productivity.

End mills are designed to remove material and create three-dimensional shapes or profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can make plunge cuts similar to a drill bit.

Precision manufactures machine tools under the following brands: Precision Twist, Precision Dormer, and Union Butterfield. They have locations around the world, and provide tools adhering to ANSI, NAS, and DIN standards.

Visit Store Now !!

Detail Products

Detail Reviews