Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter

Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Reviews

Other Picture

Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• High-performance powdered-metal cobalt for toughness and resistance to heat and wear
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter ST570 TiCN-coated T15 cobalt square nose end mill has two flutes and a 30-degree helix for general-purpose milling applications in high-temperature alloys and a wide range of materials. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

High-performance powdered-metal cobalt (T15) is high-speed steel (HSS) alloyed with cobalt, tungsten, and vanadium, which provides better heat and wear resistance than high-speed steel, and increased toughness when compared to general-purpose cobalt. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Feature

• Extra-long-reach tools provide reach beyond those of standard-length end mills
• Four flutes produce a better finish than fewer flutes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter SLRC602 uncoated high-speed steel extra-long-reach square nose end mill has four flutes and a 30-degree helix for creating sharp, unrounded cuts in a wide range of materials. Extra-long-reach end mills provide greater access to recessed areas of the workpiece than standard-length tools. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter Reviews

Other Picture

Niagara Cutter SPC408 Cobalt Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 1/2" Cutting Length, 3/16" Cutting Diameter Feature

• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SPC408 TiCN-coated cobalt steel square nose end mill has a 30-degree helix angle for milling a wide range of materials, including high-temperature alloys. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling, and slotting. Cutting diameter tolerance is +0.001” to -0.000”. The end mill has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter CD430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Double End, 3/8" Cutting Length, 1/8" Cutting Diameter

Niagara Cutter CD430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Double End, 3/8" Cutting Length, 1/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter CD430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Double End, 3/8" Cutting Length, 1/8" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Double-end square nose end mills create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter CD430 TiN-coated carbide double end square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The double-end design has cutting edges on both ends, allowing a new cutting surface to be substituted when the first shows wear, which doubles the tool’s life compared to single-end square nose end mills. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SB207 High-Speed Steel End Mill, General Purpose, Regular Length, TiAlN Coated, 2 Flutes, Ball End, 1-5/8" Cutting Length, 3/4" Cutting Diameter

Niagara Cutter SB207 High-Speed Steel End Mill, General Purpose, Regular Length, TiAlN Coated, 2 Flutes, Ball End, 1-5/8" Cutting Length, 3/4" Cutting Diameter Reviews

Other Picture

Niagara Cutter SB207 High-Speed Steel End Mill, General Purpose, Regular Length, TiAlN Coated, 2 Flutes, Ball End, 1-5/8" Cutting Length, 3/4" Cutting Diameter Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Titanium aluminum nitride (TiAlN) coating lubricates the end mill for high-temperature stability and abrasion resistance, offering better heat resistance than TiN and TiCN coatings
• High-speed steel is compatible with a variety of materials
• Ball nose end mills (also called ball end) create contoured surfaces
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SB207 TiAlN-coated high-speed steel ball nose end mill provides the efficiency of two flutes and a 30-degree helix angle for general-purpose machining. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness for abrasion resistance and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) High-speed steel (HSS) is a common, general-purpose steel for cutting tools and is compatible with a variety of materials.

The end mill’s two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. In contouring applications where the depth of cut is shallow, the end mill will create a fine finish. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s ball nose creates contoured surfaces, where sharp corners are not required, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling and slotting. Cutting diameter tolerance is +0.001" to -0.000". The end mill has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter Reviews

Other Picture

Niagara Cutter SMM830 High-Speed Steel End Mill, General Purpose, TiAlN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3.5mm Cutting Diameter Feature

• Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• High-speed steel is compatible with a variety of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SMM830 TiAlN-coated high-speed steel square nose end mill has two flutes and a metric cutting diameter for general-purpose machining. The two flutes have better chip-carrying capacity than end mills with more flutes, while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The TiAlN coating resists heat better than TiN and TiCN coatings, increasing tool life and performance. It also offers increased hardness compared to TiN and may reduce the need for lubricants based on the application. (TiAlN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed straight into the workpiece like a drill bit. The tool’s square end creates sharp, unrounded cuts. While the cutting diameter is metric, the shank is sized in inches. Cutting diameter tolerance is +0.025 mm to -0.000 mm. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at two facilities in Pennsylvania and Massachusetts. This allows the company control over production, an essential benefit for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter Reviews

Other Picture

Niagara Cutter DPC560 Cobalt Steel End Mill, General Purpose, Regular Length, TiN Coated, 4 Flutes, Double Square End, 3/8" Cutting Length, 1/8" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Double-end square nose end mills (also called square end) create sharp, unrounded cuts and have cutting edges on both ends for longer tool life
• Titanium nitride (TiN) is a general-purpose coating that combines high-temperature resistance and increased hardness compared to uncoated end mills
• Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter DPC560 TiN-coated cobalt steel double-end square end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The double-end design has cutting edges on both ends, allowing a new cutting surface to be substituted when the first shows wear, which doubles the tool’s life compared to single-end square nose end mills. Four flutes produce a better finish than two flutes. The general-purpose TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. (TiN is suitable for a range of materials, but TiCN or uncoated end mills are recommended for machining aluminum.) The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering resistance to heat and abrasion.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end has straight cutting edges to create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool. It can be fed straight into the workpiece like a drill bit for plunge cutting, and used for applications such as slotting and profiling. Cutting diameter tolerance is +0.000” to -0.0015”. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter Reviews

Other Picture

Niagara Cutter C360 Carbide End Mill, High Helix General Purpose, TiCN Coated, 3 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter Feature

• 60-degree helix angle produces a fine finish by providing efficient cutting action in light profiling and finishing applications
• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
• Square nose end mills (also called square end) create sharp, unrounded cuts

The Niagara Cutter C360 TiCN-coated carbide square nose end mill has a 60-degree helix angle for light profiling and finishing applications on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The 60-degree helix offers increased cutting action compared to end mills with lower helix angles, as it moves excess material quickly up the spiral and away from the workpiece. .

The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. The tool’s square end has straight cutting edges that create sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. The cutting diameter is +0.000” to -0.002”. The round shank accommodates a range of tool holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Reviews

Other Picture

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Feature

• Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
• Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
• High-speed steel is compatible with a variety of materials
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SC406 TiCN-coated high-speed steel square end mill has a 30-degree helix angle for general-purpose machining on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end creates sharp, unrounded cuts.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit, and used for applications such as profiling and slotting. The cutting diameter tolerance is +0.001” to -0.000”. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Reviews

Other Picture

Niagara Cutter C430 Carbide End Mill, General Purpose, Uncoated (Bright), 4 Flutes, Square End, 1/4" Cutting Length, 5/64" Cutting Diameter Feature

• Four flutes produce a better finish than fewer flutes
• Square nose end mills (also called square end) create sharp, unrounded cuts
• Carbide can run at higher speeds than high-speed steel, resisting abrasion and high cutting temperatures
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter C430 uncoated carbide square nose end mill has four flutes and a 30-degree helix angle for general-purpose machining on a range of materials. The tool’s square end creates sharp, unrounded cuts, and the center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.

The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. Cutting diameter tolerance is +0.000” to -0.002”. The round shank accommodates a variety of holders.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

• Niagara Cutter C430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Square End, 3/4" Cutting Length, 1/4" Cutting Diameter
• Niagara Cutter C430 Carbide End Mill, General Purpose, TiAlN, 4 Flutes, Square End, 1" Cutting Length, 3/16" Cutting Diameter
• Niagara Cutter ME230 Miniature Carbide End Mill, Uncoated (Bright), 2 Flutes, Square End, 0.255" Cutting Length, 0.085" Cutting Diameter
• Niagara Cutter CB430 Carbide End Mill, General Purpose, TiN Coated, 4 Flutes, Ball End, 1/4" Cutting Length, 1/8" Cutting Diameter
• Niagara Cutter C230 Carbide End Mill, General Purpose, TiN Coated, 2 Flutes, Square End, 1/4" Cutting Length, 1/16" Cutting Diameter

Detail Reviews

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter Reviews

Other Picture

Niagara Cutter HDB780 High-Speed Steel End Mill, General Purpose, Heavy-Duty, Uncoated (Bright), 8 Flutes, Ball End, 4" Cutting Length, 3" Cutting Diameter Feature

• Heavy-duty end mills have a larger diameter than conventional end mills for increased strength and rigidity when large amounts of material need to be removed
• Six flutes produce a better finish than fewer flutes
• High-speed steel is compatible with a variety of materials
• Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
• Ball nose end mills (also called ball end) create contoured surfaces

The Niagara Cutter HDB780 uncoated high-speed steel heavy-duty ball nose end mill has six flutes and a larger diameter than conventional end mills. The large-diameter shank provides strength and rigidity for machining a wide range of materials The six large flutes produce a better finish than fewer flutes. High-speed steel (HSS) is a common, general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials and provide an economical alternative to coated tools.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool. It can be fed straight into the workpiece like a drill bit and used for applications such as slotting and profiling. The tool’s ball nose creates contoured surfaces where sharp corners are not required. Cutting diameter tolerance is +0.005” to -0.000". This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at two facilities in Pennsylvania and Massachusetts. This allows the company control over production, an essential benefit for customers in a variety of industries, especially aerospace and automotive.

Visit Store Now !!

Detail Products

Detail Reviews