Sunday, July 31, 2011

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter

Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Reviews



Other Picture


Niagara Cutter SC406 High-Speed Steel End Mill, General Purpose, TiCN Coated, 4 Flutes, Square End, 5/8" Cutting Length, 1/4" Cutting Diameter Feature

  • Number of flutes varies; fewer flutes have more chip-carrying capacity and more flutes produce a finer finish
  • Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
  • High-speed steel is compatible with a variety of materials
  • Square nose end mills (also called square end) create sharp, unrounded cuts
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

The Niagara Cutter SC406 TiCN-coated high-speed steel square end mill has a 30-degree helix angle for general-purpose machining on a range of materials. The number of flutes varies; fewer flutes provide better chip-carrying capacity, while more flutes produce a finer finish. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The tool’s square end creates sharp, unrounded cuts.

The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit, and used for applications such as profiling and slotting. The cutting diameter tolerance is +0.001” to -0.000”. This tool has a Weldon shank.

End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.

Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.


Visit Store Now !!

Detail Products

Detail Reviews




No comments:

Post a Comment