1" R-8 Stub Milling Machine Arbor Reviews
1" R-8 Stub Milling Machine Arbor Feature
- Holds Milling Cutters with1" Diameter Hole
- Length Shoulder to Nut: 2"
Thursday, October 27, 2011
1" R-8 Stub Milling Machine Arbor
Tuesday, October 25, 2011
Wiha 34434 - MaxiFlex 1/4 Hose Spherical Double Socket
Wiha 34434 - MaxiFlex 1/4 Hose Spherical Double Socket Reviews
Wiha 34434 - MaxiFlex 1/4 Hose System Spherical Double Socket.
Thursday, October 20, 2011
7/16" High Speed Steel Corner Rounding End Mill- 1" Shank
7/16" High Speed Steel Corner Rounding End Mill- 1" Shank Reviews
7/16" High Speed Steel Corner Rounding End Mill- 1" Shank Feature
- Radius: 7/16"
- Shank Diameter: 1"
- Largest Diameter: 1 3/8"
- Overall Length: 4"
- High Speed Steel.
Monday, October 10, 2011
1/16" 2Fl SE Carbide End Mill
1/16" 2Fl SE Carbide End Mill Reviews
1/16" 2Fl SE Carbide End Mill Feature
- Diameter Inches: 1/16"
- Shank Diameter: 1/8"
- Length of Flutes: 3/16"
- Overall Length: 1 1/2"
- Solid Micrograin Carbide. Style E100.
Visit Store Now !!
Detail Products
Detail Reviews
Sunday, October 9, 2011
Niagara Cutter CRM125 High-Speed Steel End Mill, TiCN Coated, 4 Flutes, 1.5mm Radius, Corner-Rounding End, 7/16" Cutting Diameter
Niagara Cutter CRM125 High-Speed Steel End Mill, TiCN Coated, 4 Flutes, 1.5mm Radius, Corner-Rounding End, 7/16" Cutting Diameter Reviews
Niagara Cutter CRM125 High-Speed Steel End Mill, TiCN Coated, 4 Flutes, 1.5mm Radius, Corner-Rounding End, 7/16" Cutting Diameter Feature
- Corner rounding end mills are designed to take the edge off sharp external corners
- Four straight flutes produce a fine finish
- Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
- High-speed steel is compatible with a variety of materials
- The non-center-cutting design is for applications such as peripheral milling and finishing
The Niagara Cutter CRM125 TiCN-coated high-speed steel corner rounding end mill has four straight flutes, a metric radius, and a non-center-cutting design for creating rounded exterior corners on a wide range of materials. Corner rounding end mills have a concave, curved indent on the cutting end to create a more rounded or less rounded corner, depending on the radius selected. Four straight flutes produce a fine finish.
The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. The non-center-cutting design is for applications such as peripheral milling and finishing. Cutting diameter tolerance is +0.002” to -0.000”. Radius tolerance is +0.001” to -0.001”. The tool has a Weldon shank.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Thursday, October 6, 2011
1 1/16" High Speed Steel 6Fl SE End Mill 3/4" Shank
1 1/16" High Speed Steel 6Fl SE End Mill 3/4" Shank Reviews
1 1/16" High Speed Steel 6Fl SE End Mill 3/4" Shank Feature
- Mill Dia.: 1 1/16"
- Shank Dia.: 3/4"
- Flute Length: 2"
- No. of Flutes: 6
- Overall Length: 4 1/4"
Tuesday, October 4, 2011
1/2" 2Fl High Speed Steel SE Ball End Mill- 1/2" Shank
1/2" 2Fl High Speed Steel SE Ball End Mill- 1/2" Shank Reviews
1/2" 2Fl High Speed Steel SE Ball End Mill- 1/2" Shank Feature
- Mill Diameter: 1/2"
- Shank Diameter: 1/2"
- Flute Length: 1"
- Overall Length: 3"
Monday, October 3, 2011
Niagara Cutter SB335 Carbide End Mill, for Stainless Steel & Titanium, TiN Coated, 3 Flutes, Ball End, 3/4" Cutting Length, 7/32" Cutting Diameter
Niagara Cutter SB335 Carbide End Mill, for Stainless Steel & Titanium, TiN Coated, 3 Flutes, Ball End, 3/4" Cutting Length, 7/32" Cutting Diameter Reviews
Niagara Cutter SB335 Carbide End Mill, for Stainless Steel & Titanium, TiN Coated, 3 Flutes, Ball End, 3/4" Cutting Length, 7/32" Cutting Diameter Feature
- 35-degree helix angle provides increased cutting action and chip evacuation compared to the standard 30-degree helix
- Three flutes provide better chip-carrying capacity than four flutes and a finer finish than two, reducing the need for a second finishing cut in some applications
- Titanium nitride (TiN) combines high-temperature resistance and increased hardness compared to uncoated end mills
- Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures
- Ball nose end mills (also called ball end) create contoured surfaces
The Niagara Cutter SB335 TiN-coated carbide ball nose end mill has a 35-degree helix angle and three flutes for use on stainless steel, titanium, and high-temperature alloys. The 35-degree helix angle provides more support behind the cutting edge than higher angles, and increases cutting action and chip evacuation compared to the standard 30-degree helix. It efficiently cuts difficult-to-machine material, moving it up the spiral and away from the workpiece. The end mill’s three flutes provide better chip-carrying capacity than four flutes and a finer finish than two. They remove excess material from the cutting area and provide a third cutting edge to create an improved finish that may eliminate the need for a second finishing cut in some applications. The TiN coating combines stability at high temperatures with hardness for wear protection, increasing tool life and performance compared to uncoated end mills. The carbide substrate is harder than high-speed or cobalt steel, making it more wear resistant at high speeds and providing longer tool life.
The tool’s center-cutting design allows the tool to plunge into the workpiece like a drill bit, while its ball end creates contoured surfaces where sharp edges are not required. It is best suited for slotting applications. The tool has an eccentric primary relief feature that provides better support behind the cutting edge than a flat relief, reducing tooth breakage in deep cuts. Cutting diameter tolerance is +0.000” to -0.002”. The tool’s round shank accommodates a range of tool holders.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Saturday, October 1, 2011
Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter
Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Reviews
Niagara Cutter ST570 Cobalt Steel End Mill, General Purpose, Regular Length, TiCN Coated, 2 Flutes, Square End, 7/16" Cutting Length, 3/16" Cutting Diameter Feature
- Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
- High-performance powdered-metal cobalt for toughness and resistance to heat and wear
- Titanium carbon nitride (TiCN) coating lubricates the end mill for high-temperature stability and offers better abrasion resistance than TiN coating
- Square nose end mills (also called square end) create sharp, unrounded cuts
- Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling
The Niagara Cutter ST570 TiCN-coated T15 cobalt square nose end mill has two flutes and a 30-degree helix for general-purpose milling applications in high-temperature alloys and a wide range of materials. The two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.
High-performance powdered-metal cobalt (T15) is high-speed steel (HSS) alloyed with cobalt, tungsten, and vanadium, which provides better heat and wear resistance than high-speed steel, and increased toughness when compared to general-purpose cobalt. The TiCN coating lubricates the end mill for high-temperature stability, and offers increased hardness and greater abrasion resistance than uncoated or TiN-coated tools. The tool’s square end creates sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Friday, September 30, 2011
Magnate EM1121 End Mills, 2-Flute MicroGrain Solid Carbide - 1/4" Mill Diameter; 1/4" Shank Diameter
Magnate EM1121 End Mills, 2-Flute MicroGrain Solid Carbide - 1/4" Mill Diameter; 1/4" Shank Diameter Reviews
Magnate EM1121 End Mills, 2-Flute MicroGrain Solid Carbide - 1/4" Mill Diameter; 1/4" Shank Diameter Feature
- 30° Right Hand Helix, Single End Center Cutting; Long Length; 1/4" Mill Diameter
- 1/4" Shank Diameter; 1" Flute Height; 4" Overall Length; Right Hand Cut
Wednesday, September 28, 2011
Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter
Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Reviews
Niagara Cutter SLRC602 High-Speed Steel End Mill, General Purpose, Extra Long Reach, Uncoated (Bright), 4 Flutes, Square End, 1" Cutting Length, 3/8" Cutting Diameter Feature
- Extra-long-reach tools provide reach beyond those of standard-length end mills
- Four flutes produce a better finish than fewer flutes
- High-speed steel is compatible with a variety of materials
- Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
- Square nose end mills (also called square end) create sharp, unrounded cuts
The Niagara Cutter SLRC602 uncoated high-speed steel extra-long-reach square nose end mill has four flutes and a 30-degree helix for creating sharp, unrounded cuts in a wide range of materials. Extra-long-reach end mills provide greater access to recessed areas of the workpiece than standard-length tools. Four flutes produce a better finish than fewer flutes. The 30-degree helix angle supports general-purpose applications. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action.
High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The tool’s square end has straight cutting edges that create sharp, unrounded cuts. The center-cutting design has cutting teeth at the end of the tool, so it can be fed into the workpiece like a drill bit. Cutting diameter tolerance is +0.001" to -0.000". The tool has a Weldon shank.
End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts.
Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.
Sunday, September 25, 2011
Accurate Mfg Z9367 1/2" Flat Anvil Indicator Point
Accurate Mfg Z9367 1/2" Flat Anvil Indicator Point Reviews
Accurate Mfg Z9367 1/2" Flat Anvil Indicator Point Feature
- Diameter: 1/2"
Saturday, September 24, 2011
Magnate EM1335 End Mills, 2-Flute MicroGrain Solid Carbide - 3/8" Mill Diameter; 3/8" Shank Diameter
Magnate EM1335 End Mills, 2-Flute MicroGrain Solid Carbide - 3/8" Mill Diameter; 3/8" Shank Diameter Reviews
Magnate EM1335 End Mills, 2-Flute MicroGrain Solid Carbide - 3/8" Mill Diameter; 3/8" Shank Diameter Feature
- 30° Right Hand Helix, Double End Center Cutting; Stub Length; 3/8" Mill Diameter
- 3/8" Shank Diameter; 1/2" Flute Height; 2-1/2" Overall Length; Right Hand Cut
Subscribe to:
Posts (Atom)